Tilt Tray Remote Control Hydraulic Valve 6 Function 80LPM
Ready to fit Plug and Play or Go To Work.
This our newest and most cost effective Radio Remote Control System complete with an Italian 5 Spool (10 functions with Eight functions remote controlled) Hydraulic Flow Control Valve rated to 270 bar (3900 psi) and 80 Lt/Min oil flow.
Our brand new system uses an Australian Designed Radio Remote control with a range of up to 150m. It has been tested and found to comply with the limits for a Class [B] digital device, pursuant to the Australian/New Zealand standard AS/NZS 4268.
It is made up of with a brand new Italian Made Galtech Q75-5 Monoblock Hydraulic Flow Control Valve rated for oil flows up to 80 liters per minute at 3900 psi complete with a 8 button hand help radio remote transmitter and a truck mounted receiver unit.
This remote control kit will improve the efficiency and speed as well as the safety of your Vehicle Recovery Operations.
The Hydraulic Valve has 5 levers (10 Functions) with Radio Remote Control of 6 functions,
1 & 2 Winch In & Out,
3 & 4 Tray Tilt Up & Down and
5 & 6 Tray Slide In & Out
All 6 functions have manual override, (levers)
Tee Bar Lift & Lower and Slide in & Out are manual lever control only.
Included in the Kit is an Italian made Galtech Q75-5 five spool Hydraulic flow control valve with a rated oil flow of up to 80 Lt/Min and maximum pressure of 3900 PSI.
The hand held 8 Button Radio Remote Transmitter has a range of up to 150 meters. Both the truck mounted Receiver and transmitter are Au/NZ Certified.
Please watch this 2 minute video of us taking a standard 3 spool Hydraulic valve and fitting it with Pneumatic Actuators that will receive the remote signal from the remote control units.
Wired up and connected to 100 PSI of compressed the end result
Designed specifically for Tilt Tray recovery vehicles but can be modified to work on Crane trucks, Skip Bin Trucks, as well as Front End Loaders, Drilling rigs, farming and excavation equipment. Backhoes or any application where you need to control 5 individual cylinders or hydraulic motors (ie winches).
This unit can replace most medium to large tilt tray truck's existing spool valves. Simply bolt on, & either re attach your existing hoses, or if different thread, buy adaptors (we can supply cheaply) to make your existing hose threads compatible.
The remote unit simply needs power, 24 volt DC , & basic wiring to the valve solenoids (wiring diagram provided).
The hydraulic valve will require clean dry compressed air from your truck's air supply for the pneumatic solenoids and spool actuators. Solenoids come complete with push fit air fittings and silencers.
The 8 button remote comes with a transmitter and a receiver. the receiver also has a key pad which can also be used to directly to control the valve.
Levers are still attached for convenient use. This valve comes standard with 5 cylinder spools, which means when the lever/or button are released, the tray, winch etc will lock in place.
These valves are regularly used in hydraulic circuits to divert the flow of high pressure oil and are typically used to control the speed and movement of hydraulic cylinders or motors.
Construction = Monoblock
Material of Construction = Steel
No of Spools = 5
No of air/ solenoid actuated spools = 3
Air push fits = 4mm
Material of Construction = Case Hardened Steel
O-rings made of NBR (Buna-N®)
Max Flow Rate = 80 liters/min (20 Gallons per Minute)
Max Working Pressure = 270 Bar (3900 PSI)
Spool Type = Cylinder
Spool Movement = Lever action, Spring Return to Center.
Built in Relief Valve = Adjustable (factory set at 175 bar 2500 PSI)
Pressure Port 1/2" BSPP
Cylinder Ports 1/2" BSPP
Tank Port 3/4" BSPP
Power beyond port 3/4" BSPP
Operating temperature range: -20 °C to + 80°C
Dimensions = L x W x H = 320x 290 x 90 mm (300mm with levers installed)
Weight 15 KG
Detent Kits also available at $60 each
Power beyond plug $23
Need More Information?
Please call Australia +61 07 5563 1982 or send us a an email at email@example.com
ay for different spool configurations, spool numbers and costings.
Many types of adapters threads, hydraulic hose and field fit hose fittings available please see our other listings
This a High Quality Valve and has many outstanding features, including.
built in adjustable relief valve
Low pressure drop.
Long service life.
Choice of various ports and circuit valves.
High accuracy spool is hardened for long term accuracy.
Handle shift operation.
Australia Wide $45
These 80 LPM valves require a separate "Power Beyond" sleeve to operate a valve downstream.
Detent is when a you push/pull a lever, it stays forward/back at that position until you move it back to the centre.
Installation ; As per the listed photos, there are a choice of two pressure ports "P" (only use one), two "T" Tank return ports and also there is a "C" port. This "C" port is for the: Power Beyond function. This allows another valve to run pressure from this C port downstream if necessary. (must be a lower volume though). A & B ports run to your cylinder or other functions.
OUR EMAIL IS – HoseFixersAustralia@gmail.com
Additional information about us...
Tax invoices are supplied with every purchase
Emails will be answered within normal business hours (ie: 8.30am - 5.00pm M-F)
Out of Stock
It is our desire to always have every listed item actively in stock. Occasionally (but very seldom) due to high demand, short supply or human error we may be momentarily out of stock on an item.
If this happens you will be notified and given the option to either cancel for a full refund or wait for the part to come in (typically 3-14 days)