SPARE Filters for Respirator Mask Pack of Five FFP2 N95

SKU 10042
In stock
Product Details



If you want a BLACK Respirator Mask Click Here

If you want an ORANGE Respirator Mask Click Here

Ideal for the dusty upcoming Dusty Dry Season in Southeast QLD,

Also great for the following trades and tradies,

  • Tree Loppers, Wood Chippers, Stump Grinding,
  • Earth Moving and excavation, Lawn Mowing and garden care,
  • Demolition works, Screening plant operators,
  • Farming, Spraying and Harvesting.
  • Construction, Floor Striping, Sanding and Grinding,
  • Shot Blasting, painting and Minor Spray Painting.

Certification is to European Standard FFP2, (Europe EN 149-2001) + AI-2009.

FFP2 respirators are ideal for filtering non-oil-based particles such as those resulting from Wildfires, PM 2.5 Air Pollution, Volcanic Eruptions, or Bioaerosols (e.g. Viruses) as well as some Oil based particles.

Videos on a very similar design and specifications to our face mask and instructions on how to fit and wear.

This mask is similar and compatible to the following standards and requirements of other countries

N95 (United States NIOSH-42CFR84)
• KN95 (China GB2626-2006)
• P2 (Australia/New Zealand AS/NZA 1716:2012)
• Korea 1st class (Korea KMOEL - 2017-64)

• DS (Japan JMHLW-Notification 214, 2018)

Please be aware, prior to selecting a respirator, users should consult their local respiratory protection regulations and requirements or check with their local public health authorities for selection guidance.

FFP2 masks offer protection from fine toxic dusts, fibres, aqueous mists, and oil based mists.

The Extract below explains the compatibility of this mask with other world wide standards

During pandemic or emergency situations, health authorities often reference these standards when making respirator recommendations, stating, for example, that certain populations should use an “N95, FFP2, or equivalent” respirator.

This document is only intended to help clarify some key similarities between such references, specifically to the following FFR performance standards:
• N95 (United States NIOSH-42CFR84)
• FFP2 (Europe EN 149-2001)
• KN95 (China GB2626-2006)
• P2 (Australia/New Zealand AS/NZA 1716:2012)
• Korea 1st class (Korea KMOEL - 2017-64)
• DS (Japan JMHLW-Notification 214, 2018)

As shown in the following summary table, (see pictures in listing) respirators certified as meeting these standards can be expected to function very similarly to one another.

Inhalation resistance testing flow rates range from 40 to 160L/min. Exhalation resistance testing flow rates range from 30 to 95 L/min.

Some countries require testing to be performed at multiple flow rates, others at only the high or low end of those ranges.

Although this appears to suggest that the standards’ requirements for breathing resistance (also called “pressure drop”) differ from each other, it’s important to understand that pressure drop across any filter will naturally be higher at higher flow rates and lower at lower flow rates.

Various pressure drop requirements are actually quite similar. The chart (see pictures in listing) shows a representative filter pressure drop curve.


  • 5 x Replacement filters


Q: What is the life expectancy of the activated carbon filter?

A: The filters last on average around 60 hours of continuous use (around 1 week if using it for 8 - 10 hours a day) in a relatively clean air environment.

In a dusty / smoky environment it lasts less, time varies depending on the amount of pollutants in the air and accumulation of particles on the filter.

Usually when you find it difficult to breathe you should replace the filter.

Approximate filter life (usage duration);

  • 50-60 hours of continuous use when protecting against airborne pathogens, allergens, odors etc.
  • 30-40 hours of continuous use in light dusty / smoky exposure e.g. off-road, construction, demolition etc.
  • 0-20 hours of continuous use in heavy dusty / smoky exposure to smoke from bush fires, heavy smog and dusty conditions.

Save this product for later