Pair 1/2 inch M/F Flat Face Dry Break Hydraulic Coupler
SKU FLAT FACE HYDRAULIC COUPLERS 1/2" BSPP MALE AND FEMALE
These are flat face dry break couplers are used extensively on all manner of hydraulic machinery by our customers , they are the most common flat face coupler used on small to medium sized Australian machines as well as various Bobcat Attachments.
They have 1/2" BSPP threads and are rated to flow up to 115 Lt/min at pressures up to 5000 PSI 330 bar. ISO 16028 A SERIES
Manufactured by EngMatTec they are suitable for applications involving dusty or dirty environments and where oil loss on disconnection cannot be tolerated.
Designed for use in excavator hammer and Auger circuits and other applications involving high pressure pulses.
Also good for Construction plant, Mobile equipment, General Industrial, Manufacturing Mining and Agricultural Attachments and Equipment.
This sale is for one pair, ie: 1 x female half, 1 x male half, (postage for extra sets only $1.50 per set)
It is easy to check compatibility.
Please refer to our size charts in photos for correct sizing. The best measurement to use is 'J' column.
** Please note , this sale is ONLY for 1/2" x 1/2" couplers , the A13 dimension coupler in the chart. If you need other sizes in the chart, please check our other listings or message us for prices via our contact us page.
These High Quality Flat Face quick connect hydraulic couplings are manufactured by EngMatTec and are suitable for applications involving dusty or dirty environments and where oil loss on disconnection cannot be tolerated. This series of couplings are designed for use in excavator hammer and Auger circuits and other applications involving high pressure pulses. Construction plant, mobile equipment, general industrial, mining and agricultural.
These 1/2" flat face couplers are compatible with;
The above price is for one pair, (one set which includes one male and one female coupler) single male/female halves are available, please call or email us for this option.
Please refer to our size charts below for correct sizing. The best measurement to use is 'J' column.
Rated Working Pressure
350 Bar (5100 PSI)
From 20 to 115 Litres/Minute
less than 0.1 Bar @ 20 Litres / Minute
6 Bar @ 115 Litres / Minute
-20 to 100 degrees Celsius
Materials of Construction
Carbon steel body, treated to increase hardness and corrosion resistance, Nitrile seals. H Series couplings are Zinc plated.
Flat mating faces are easily wiped clean to prevent the ingress of contaminants.
Improved flow path minimises the pressure drop.
Non-spill design avoids fluid loss during connection and disconnection.
No air intrusion during connection.
Locking sleeve prevents accidental disconnection.
Zinc nickel surface treatment and meets 200 hour salt spray tests.
This Series conform to ISO 16028 (2006) in all respects
Connection / Disconnection Under Pressure
Connection with residual pressure in the line will be difficult or impossible. For applications where connection under pressure is required, HCP male couplings, or screw couplings from either the HSC, HS or RS ranges are recommended.
Disconnection of any quick disconnect / quick release coupling whilst under full system pressure can be very dangerous and should not be attempted.
Please contact us for any questions you may have.
Additional information about us...
Tax invoices are supplied with every purchase
Emails will be answered within normal business hours (ie: 8.30am - 5.00pm M-F)
Out of Stock
It is our desire to always have every listed item actively in stock. Occasionally (but very seldom) due to high demand, short supply or human error we may be momentarily out of stock on an item.
If this happens you will be notified and given the option to either cancel for a full refund or wait for the part to come in (typically 3-14 days).
If you wish to buy more than one item please contact us before processing the order and we can create a custom combined invoice for you. We can then give you a great postage price. PS. It may take time if you buy on weekends.
IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.