OIL COOLER Various sizes 60-300 Lt / min 12v , 24v fan

SKU OAC
AU$660.00
In stock
1
Product Details

12 volt or 24 volt Oil coolers

Oil Cooler with Axial Fan - 60 to 300 LPM

Oil coolers or heat exchangers are used to reduce excessive heat in hydraulic systems. The reliability, efficiency and lifespan of key components such as bearings and seals can be greatly improved by the use of oil cooling to remove excess heat and maintain an optimal working temperature.
There is a recommended option for a Temperature sensor switch which simply turns on the fan when detected oil heat reaches a certain level. ie. Will not run as often in winter. Please refer to charts for correct sizing. Remember oil coolers are designed to go on the return to tank oil circuit, ensure there are large enough hoses to not cause 'back pressure' Max pressure is 16 Bar / 240 Psi.
These coolers simply use BSPP ports.




How to Calculate the Size of an Oil / Air Cooler.

You will need a thermometer (infrared is best) to measure oil temperature and a time piece to measure the time. Pick a location on the machine where heat is experience and you know oil is flowing through it and measure at the same location every 15 minutes, record the temperature and the time.

Summarise all recordings

Start temperature

The rise or final temperature

And the time it took (in hours) for the temperature to rise to the final recording.




for design assistance and sizing

Please contact email at sales@mhfgc.com.au

or phone us on +61 (07) 5563 1982

IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.

pIC $ RL 1.720

Save this product for later