Hydraulic Power Pack Compact 12-24V DC 5 Lt/min 2500 PSI P&T / Single Acting / Double Acting

In stock
Product Details

Powered by 12 or 24 Volt DC this extra compact Hydraulic Power Pack or HPU comprises of a Motor, Pump, Tank & optional Solenoid valves. It is designed to supply an oil flow of 5 Lt/Min at a Pressure of 2500 PSI.

Special short length unit 2.5 litre tank. Dimensions Length = 36cm x Width = 23cm x Height = 21cm

This is available in;

  • P & T, . Pressure & Tank port model. Connect a pressure line to the hydraulic unit's outlet, which in turn will connect to your own manual flow control valve.
  • The other port is a return to tank port from your valve. Please note, with this option, you will need to switch on the powerpack to operate.
  • Some control valves have microswitches that turn the powerpack on automatically. We can supply our valves with microswitches. No pendant supplied or required.
  • S/A single acting. Comes with a pendant controller, Powerpack only drives load up. gravity brings load down
  • D/A double acting. comes with a pendant control, drives load both up & down. (as per photo)

# Intermittent use only !

e.g. Mini Cranes, Tail Gate Loaders, Ramps on trailers and low loaders Camper van or camper trailer leveling or any other hydraulic circuit requiring intermittent use, low flow and high pressure hydraulic oil.

This Unit is capable of generating up to 200 Bar (3000 PSI) Pressure at a reduced flow rate.

Pressure relief is set at 2500 psi as standard


Power Rating 12 Volt DC, 1.6 KW , or 24 Volts DC, 2.2 KW

  • Flow 5.0 liters Minute at 170 Bar (2500 PSI)
  • Max Pressure up to 200 BAR (3000 PSI at reduced flow)
  • Pressure relief valve Factory set at 170 BAR (2500 PSI)
  • Discharge Ports 9/16 UNO
  • 2.5 Liter capacity Oil tank with combination filler breather level plug and separate plug.

  • Can be mounted Horizontally as well as Vertically (Motor Up only)# You MUST contact us so we can change oil pick up!!!!
  • Safety thermistors installed in motor windings to prevent overheating.
  • Duty Cycle = 25% at Low Duty, low load and pressure (600 PSI) = 100Amps Draw,
  • Allowable run time 12.5 minutes and then allowed to totally cool down.

or 150 seconds ON - 400 seconds OFF.

  • Duty Cycle = 19% at Medium duty medium load and pressure (1600 PSI) = 160 Amps Draw
Allowable run time 7.5 minutes and then allowed to totally cool down.
or 150 seconds ON - 640 seconds OFF.

  • Duty Cycle = 7% 300 Amps High Duty High Load and pressure (3000 PSI) = 300 Amps Draw
Allowable run time 1.7 Minutes and then allowed to totally cool down
or 150 seconds ON and 2000 seconds OFF.

  • Dimensions Length = 36cm x Width = 23cm x Height = 21cm
  • Weight 16 KG

Use ISO 48 Hydraulic Oil or ATF Fluid for this unit

We also offer ‘Depot to Depot’ freight as a cheaper alternative for larger items. Please call or email for this freight option Please call us on 0755631982


$pic RL 14.10.19

Save this product for later