Hydraulic Oil Spin on 10 or 25 micron Return Filter 3/4" BSP Ports
HYDRAULIC OIL FILTERS
SUITS MOST HYDRAULIC EQUIPMENT. TRACTORS, LOG SPLITTERS, BOBCATs, etc etc
Hydraulic equipment is generally used and operated in some the harshest environments around and if damaged they are Expensive to Replace.
The Long term reliability of hydraulic equipment is greatly enhanced if the Hydraulic Oil is continuously filtered.
These Filter items are Quality items and are manufactured using the latest Filtration materials and technology by FaiFiltri Italy.
These Filters are usually installed in the low pressure tank return line and generally just before the oil returns to the tank. 25 micron is ideal for most agricultural type hydraulics. It provides good flow.
Options; Please note for complete head & filter, select each item & click 'Add to Bag'
1 x Aluminium Alloy Filter Head complete with "Clogged filter" internal bypass set at 1.7 Bar (25 PSI) and Buna "N" O ring seal,
CS5000- 10 ;1 x Spin On metal Canister with 10 micron (paper filter media) 96 mm diameter x 148 mm long 70 LPM
CS5000- 25 ;1 x Spin On metal Canister with 25 micron (paper filter media) 96 mm diameter x 148 mm long 100LPM
CS7000 - 10 ;1 x Spin On metal Canister with 10 micron (paper filter media) 96 mm diameter x 210mm long 120 LPM
CS7000 - 25 ;1 x Spin On metal Canister with 10 micron (paper filter media) 96 mm diameter x 210mm long 120 LPM
The filter head has two 1/8" BSPT ports available to mount an optional "clogging indicator"
(Clogging Indicators are Available at an additional $30 each)
Filter Head Inlet and Outlet ports are 3/4" BSPP.
On the top of the Filter Head are two M6 threaded holes 38 mm apart for mounting the filter assembly to a bracket or machine framework.
Dimensions assembled. 175 mm high 100 mm wide 100 mm deep. CS5000 HEAD + FILTER
Dimensions assembled. 240 mm high 100 mm wide 100 mm deep. CS7000 HEAD + FILTER
Max Oil Flow Rate 70- 120 litres / Minute ( 30 US GPM) (Larger flows and sizes available)
Max Operating Pressure 12 Bar (174 PSI)
Max Differential pressure 4 Bar (58 PSI)
Burst Pressure 25 Bar (363 PSI)
Filter head internal Bypass Pressure 1.7 Bar (25 PSI)
Filter media = inorganic, impregnated resin bonded micro fibers supported upstream and downstream.
Operating Temperature -25 to +110 degrees C
Filtered Media = Suitable with All Mineral Oils, Fuels, Glycol/Water solutions and Most Synthetic oils.
Postage Australia Wide $13.40
Call us on 0755 631982 with any questions you may have or for a different filter port size or micron .