Hydraulic Hose 1/2" Two Wire 50 Meters SAE100R2-08 MSHA EUROPEAN MADE 4040 PSI

SKU R2-08 x 50
AU$360.00
In stock
1
Product Details

HYDRAULIC HOSE 1/2" ID Two Wire Braided 4000 PSI Working Pressure 50 Meter Coil

This is a high quality EngMatTec ® hose made in Europe. Made to SAE (Society Of Automotive Engineers) Specifications.

ENGMATTEC 100R2AT 1/2" DN12 Hose is also fully compatible, interchangeable and or as a direct replacement for the following brands of Hydraulic 2 wire hose.

  • RYCO AVENGER T28A and RYCO DIEHARD T28D Non-Skive Hoses.
  • GATES 8G2 and 8G2H
  • EATON GH195 AQP HI-IMPULSE hoses
  • MANULI FLUICONNECTO 2SN FL2T08.
  • MANULI FLUICONNECTO ROCKMASTER 2SC H01030006 H01030010, H01030012, H01030019 (DOUBLE THIS HOSE’S BEND RADIUS, SLIGHTLY LESS WEAR RESISTANCE).
  • PARKER 301SN - 4, -6, -8, -12 NON SKIVE HOSE.

  • PIRTEK SAE 100R2AT, SIZES R2AT-08.
  • TOTAL RUBBER SUNFLEX SAE 100 R2AT EN 853 2SN, SIZE HYD-R2T-08-SF-S
  • ENGMATTEC 100R2AT 1/2" DN12 Hose can also be used with the following hose fittings
  • RYCO BITELOK ONE-PIECE CRIMP NON SKIVE T200 AND T700 hose tails
  • EATON TTC / Z Series braided hose one-piece bite the wire style hose fittings.
  • Southcott Super Crimp S series stems with FNP-08 ferrules as well as Ezi-Crimp Non Skive One Piece Series E fittings.
  • CHILD FIELD FIT COUPLINGS Series RMB, RFB, RMJ, RFJ, with BN2-08 non skive Bodies.
  • RYCO FIELD ATTACHABLE L SERIES L00-08 FERRULES and 600 SERIES INSERTS.
  • TAIPAN 100R2GP-08AHF and 100R2-08AHF hose and K08 series one piece non skive hose tails and or Field Attachable D08 Tails and D2-08 Bodies.

We have used this same hose extensively in our hydraulic service trucks , & on new builds. It has a great tough outer case, yet is very flexible for ease of fitting. This hose is a quality product, beware of inferior Chinese hose.

This hose is Certified to work without failure a minimum of 200,000 Impulse Cycles (equivalent to almost 1000 excavator earth moving hours) at 133% of maximum pressure (4820 psi) and at 100% of maximum temperature 120 °C.

SAE 100R2 – 08 NON SKIVE HOSE (Two Wire)

Construction

Synthetic rubber inner tube with Two layers of braided high tensile steel wire reinforcement and a wrapped, Oil, Ozone, Weather and Abrasion Resistant synthetic rubber outer cover.

Application

High pressure service with petroleum base hydraulic fluids, water, Air, Water-glycol, water-oil, fire resistant hydraulic fluids, hot oil grease, lubricants, crude and fuel oils. For air applications above 100 PSI the cover should be pin pricked.

# Please note, shipping rates are based on Australia Post calculator. If your delivery address is in a major centre we can use couriers at a better rate. Feel free to email or call for a freight quote.

Need another hose size, field fit reusable fittings couplers and or adaptors for your application?

Just send us a message with any questions you may have.

Specifications

Pressure Range

Working Pressure: 4040 PSI

Burst Pressure: 16000 PSI (Minimum)

Range of Temperature

-40⁰C to + 120⁰C

Minimum Bend Radius

180mm

Weight

0.63 KG/Mtr

Freight

Please contact us for a more competitive shipping quote.

We are able to send freight from depot to dept at a cheaper rate.

hosefixersaustralia@gmail.com075563192

Please send us a message for any questions you may have.

Best regards,
Hydraulic.Online

26.10.20 $RL

Save this product for later