Hydraulic Flow Control Valve Reverse Check BSPP

SKU STU
AU$68.00
In stock
1
Product Details

Needle Flow Control Valves with Reverse Flow Check
Face this valve in one direction, and oil flow can be adjusted to the required speed flow, any oil going in reverse direction will have full flow.

Commonly used when extending single acting cylinders using cheap low flow DC power packs install this valve after the pump and you will be able to safely control the lowering of a load. Made by Bolev

.


Buy with Confidence from a long established Hydraulic Service Center get a 12 month warranty and an Australian Tax Invoice.


The Speed of Hydraulic motors and or cylinders can be controlled using this valve.

This valve is also available with throttle / speed control in one direction only,
with free flow in opposite direction. Please ask a question or call 0755 631982
Features
  • Throttle and shut-off the flow of Oil or other liquids in one direction, free flow in other.
  • Designed for in-line assembly with female BSP threaded connections
  • Graduated turning knob and coded spindle to accurately control flow
  • Set-screw located on side of turning knob to lock valve in position
  • Panel mounting nuts available on request
  • Maximum working pressure: up to 400 bar / 6000 PSI
Materials of Construction.
  • Body and spindle made of Steel (1.0715), zinc/iron-plated (Fe/Zn Fe Co 8 C) and free of hexavalent chromium CrVI
  • Turning knob made of Polyamide (PA)
  • O-rings made of NBR (Buna-N®)
Technical Data
Maximum working pressure:
400 bar / 6000 PSI
Operating temperature range:
-20 °C to +100 °C / -4 °F to +212 °F
18/10/2019 RR $
Save this product for later