Hydraulic Flow Control Valve Reverse Check 6000 PSI

SKU STUF 04, 06 ,08,12, 16
AU$75.00
In stock
1
Product Details

A hydraulic Flow Control Valve with Reverse Check has the ability to easily adjust the speed of the oil flow in one direction but still allows oil flow in the reverse direction to free flow.

Commonly used when extending single acting cylinders and power packs, install this valve after the pump and you will be able to safely control the lowering speed of a load such as a

dump truck (tipper body) or Lift, the connection of the pressure line from the pump should be connected to port number "2"

Various sizes available for controlling oil flows of up to 15 Lt/Min for 1/4"
30 Lt/Min 3/8"
50 Lt/Min1/2"
80 Lt/Min 3/4"
150 Lt/Min 1"
Made in Italy.

1/4" Flow 15 LPM

3/8" Flow 30 LPM

1/2" Flow 50 LPM #

3/4" Flow 80 LPM

1" Flow 150Lpm

Please see price options

Buy with Confidence from a long established Hydraulic Service Center get a 12 month warranty and an Australian Tax Invoice.


The Speed of Hydraulic motors and or cylinders can be controlled using this valve.
IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.
This valve is also available with throttle / speed control in one direction only,
with free flow in opposite direction. Please ask a question or call 0755 631982
Features
  • Throttle and shut-off the flow of Oil or other liquids in one direction, free flow in other.
  • Designed for in-line assembly with female BSP threaded connections
  • Graduated turning knob and coded spindle to accurately control flow
  • Set-screw located on side of turning knob to lock valve in position
  • Panel mounting nuts available on request
  • Maximum working pressure: up to 400 bar / 6000 PSI
Materials of Construction.
  • Body and spindle made of Steel (1.0715), zinc/iron-plated (Fe/Zn Fe Co 8 C) and free of hexavalent chromium CrVI
  • Turning knob made of Polyamide (PA)
  • O-rings made of NBR (Buna-N®)
Technical Data
Maximum working pressure:
400 bar / 6000 PSI
Operating temperature range:
-20 °C to +100 °C / -4 °F to +212 °F

Save this product for later