High Pressure Hydraulic Ball Valve 5100 PSI 3/4" 1-1/2"
High Pressure 2 Port Hydraulic Ball Valve With Hard Chrome Steel Ball and Steel Body.
Your choice of 3/4" ,1", 1-1/4" or 1-1/2" Inside Diameter 2 Way Steel Ball Valve, with BSPP Female Ports.
The valve uses a perforated hard chrome plated steel ball which when turned through 90 ° (1/4 turn) will allow or stop the flow of Liquids or Gases.
The valve's handle is in line with flow when open, and at 90° when closed, this design makes it simple to know at a glance if valve is open or closed.
These Ball valves are durable, reliable, and continue to perform well after many cycles, they will continue to close with out leaking even after long periods of non use.
These qualities make them an excellent choice for shutoff flow control applications.
They are not designed for fine control or throttling applications.
Please see or search for our Needle Flow Control Valves for this type of application.
Quality item made in Italy.
Pressure Rating Flow for 3/4" = 80 Lt/min, pressure rated to 400 bar (5880 PSI)
Flow for 1" = 150 Lt/min , pressure rated to 350 bar (5150 PSI)
Flow for 1-1/4 = 150 Lt/min, pressure rated to 350 bar (5150 PSI)
Flow for 1-1/2" = 150 Lt/min, pressure rated to 350 bar (5150 PSI)
Ports = 2 x BSPP Female.
Materials of Construction Body = Zinc Plated Steel Ball = Hard Chrome Plated Steel Valve Seats = Machined Delrin Seals = Viton. Handle = Aluminium
Buy with Confidence from a long established Hydraulic Service Center get a 12 month warranty and an Australian Tax Invoice
Need another size or type of valve? Just Call Us on 07 5563 1982
IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.