Flat Face Hydraulic Couplers 3/4" BSPP Male/Female Pair
SKU 2FFI 3434
3/4" Body x 3/4" BSPP Thread Flat-Face Couplers ISO16028 A SERIES
This sale is for one pair, ie: 1 x female half, 1 x male half, (postage for extra sets only $1.50 per set)
Used extensively on all manner of Hydraulic machines, ISO16028 flat face couplers are the most common flat faces used. They have 3/4" BSPP Threads. It is easy to check compatibility. Please refer to our size charts in photos for correct sizing. The best measurement to use is 'J' column.
They are suitable for applications involving dusty or dirty environments and where oil loss on disconnection cannot be tolerated. This series of couplings are designed for use in excavator hammer and Auger circuits and other applications involving high pressure pulses. Construction plant, mobile equipment, general industrial, mining and agricultural.
These 3/4" flat face couplers are compatible with;
Please refer to our size charts below for correct sizing. The best measurement to use is 'J' column.
Rated Working Pressure
350 Bar (5100 PSI)
Pressure drops less than 0.1 Bar @ 20 Litres / Minute
6 Bar @ 150 Litres / Minute
-20 to 100 degrees Celsius
Carbon steel body, treated to increase hardness and corrosion resistance, Nitrile seals. H Series couplings are Zinc plated.
Flat mating faces are easily wiped clean to prevent the ingress of contaminants.
Improved flow path minimises the pressure drop.
Non-spill design avoids fluid loss during connection and disconnection.
No air intrusion during connection.
Locking sleeve prevents accidental disconnection.
Zinc nickel surface treatment and meets 200 hour salt spray tests.
This Series conform to ISO 16028 (2006) in all respects
Connection / Disconnection Under Pressure
Connection with residual pressure in the line
For applications where connection under pressure is required, HCP male couplings, or screw couplings from either the HSC, HS or RS ranges are recommended.
Buy with Confidence from a long established Hydraulic Service Center get a 12 month warranty and an Australian Tax Invoice.
Phone: 07 5563 1982
Hours: 8am to 4pm Monday - Friday, excluding public holidays
Tax invoices are supplied with every purchase
Out of Stock
It is our desire to always have every listed item actively in stock. Occasionally (but very seldom) due to high demand, short supply or human error we may be momentarily out of stock on an item. If this happens you will be notified and given the option to either cancel for a full refund or wait for the part to come in (typically 3-14 days).
If you have any questions please don’t hesitate to contact us for further assistance.
IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.