Flat Face Hydraulic Couplers 1" BSPP Male/Female Pair Made in EU

SKU 2FFI-1616
AU$255.00
In stock
1
Product Details

Used extensively on all manner of Hydraulic machines ISO16028 flat face couplers are the most common flat faces used. They have 1" BSPP Threads. It is easy to check compatibility. Please refer to our size charts in photos for correct sizing. The best measurement to use is 'J' column. They are suitable for applications involving dusty or dirty environments and where oil loss on disconnection cannot be tolerated. This series of couplings are designed for use in excavator hammer and Auger circuits and other applications involving high pressure pulses. Construction plant, mobile equipment, general industrial, mining and agricultural. These are 'Residual' pressure OK.

Made in Italy

These 1" flat face couplers are compatible with;

DNP PLT4, Stucchi FIRG/A Series, Faster 2FFI , Hansen QA, Ryco R110-06/08, Safeway FF49, Aeroquip FD89/FD49

The above price is for one pair, (one set which includes one male and one female coupler) single male/female halves are available, please call or email.

Please refer to our size charts below for correct sizing. The best measurement to use is 'J' column.

  • 1" BSPP Female
  • 230 Bar (3380 PSI)/
  • 40 to 320 Litres/Minute
  • Pressure drops less than 0.1 Bar @ 40 Litres / Minute
  • 4Bar @ 320 Litres / Minute
  • -20 to 100 degrees Celsius
  • Zinc plated, heat treated carbon steel. Nitrile ‘O’ ring seals with PTFE backing rings
  • Positive, quick connection ensured by the snap together locking ball system.
  • When connected the male and female halves can rotate, even under pressure, thus avoiding any torsional stress in the flexible hoses.
  • Poppet valves have balanced springs and calibrated oil flow passages to minimize the pressure drop.
  • Poppet valve seals have shockproof protective edges.
  • ISO 16028.

Connection / Disconnection Under Pressure

Connection with residual pressure OK. For applications where connection under pressure is required, HCP male couplings, or screw couplings from either the HSC, HS or RS ranges are recommended.

Disconnection of any quick disconnect / quick release coupling whilst under full system pressure can be very dangerous and should not be attempted.


Buy with Confidence from a long established Hydraulic Service Center get a 12 month warranty and an Australian Tax Invoice.

Email: hosefixersaustralia@gmail.com
Phone: 07 5563 1982
Hours: 8am to 4pm Monday - Friday, excluding public holidays
Tax invoices are supplied with every purchase
Out of Stock
It is our desire to always have every listed item actively in stock. Occasionally (but very seldom) due to high demand, short supply or human error we may be momentarily out of stock on an item. If this happens you will be notified and given the option to either cancel for a full refund or wait for the part to come in (typically 3-14 days).
If you have any questions please don’t hesitate to contact us for further assistance.
Best regards,

Hydraulic.Online



IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.

Save this product for later