CETOP 3 hydraulic solenoid Directional Flow Control Valve
These are high quality CETOP 3 Electric Solenoid Operated Directional valves. These are made to a world wide standard re size & bolt holes etc. CETOP 3 solenoid valves are solenoid operated and control the start, stop and direction of the oil flow in the hydraulic circuit. It comes complete with solenoids & DIN plugs & bolts. Please note; this listing ONLY for a Cetop 3 valve, you will require a 'subplate' if intending to make a free standing control valve. See other listings. This is a simple swap in / out to replace your faulty/old cetop 3.
We also stock & supply a large range of Cetop 3 & Cetop 5 models, including various ported sub plates,counter balance subplates, manifolds as well as up to 8 section sandwich valves.
Specifications
Construction = Monoblock Material of Construction = Steel No of Spools = 1 Material of Construction = Case Hardened Steel O-rings made of NBR (Buna-N®) Max Flow Rate = 40 liters/min Max Working Pressure = 315 Bar (4600 PSI) Spool Type = Cylinder Spool (Closed Centres), Open, Float and Tandem Centres also available at no extra cost, Spool Movement = Electric Solenoid Coil with illuminated LED din plugs, Spring Return to Center. Solenoid Coil Voltage 12 Vots DC 24 V DC or 240 AC Operating temperature range: -20 °C to + 80°C