AUSTRALIAN CYLINDER 2.5 INCH BORE VARIOUS STROKES 6.6 Tonne @ 3000 PSI
Australian made all Steel Double Acting Hydraulic Cylinder with 2.5 inch diameter Piston.
1.5 inch diameter Hard Chrome Rod and Female Clevis with 1 inch pin both ends.
Producing 6.6 tons push force at 3000 PSI Extending.
4.2 tons at 3000 PSI Pull force retracting.
Watch as this robot opens the doors to a Mazak CNC Quick Turning center and rotates a pair of Rod End Clevises in the machine before closing doors and placing a completed drilled and tapped Rod end Clevis into the storage tray.
These cylinders can be also be used as single acting rams (ie. gravity pull or push down).
Made with DUAL 3/4" UNO ports at each end to allow more options to connect up in tight spots.
Buy with Confidence from a long established Hydraulic Service Center get an Australian Tax Invoice 2 Year Warranty and .
WARNING: Hydraulic cylinders without a hose burst valve, pilot operated check valve or counter balance valve directly mounted to the cylinder will not meet Australian Standard AS1418.8, nor occupational health & safety rules.
• 2.5" 63mm Bore
• 1.5" Rod (38mm)
• stroke from 4 to 48 inch (102 mm to 1220 mm) Longer and custom lengths available on request
PLEASE SEE ATTACHED PICTURES FOR
STANDARD STROKE LENGTHS WEIGHTS AND $ PRICES.
• Port Sizes 3/4" UNO
• 1" Female clevis with 1" High Tensile steel Pin with R Clips each end
• Weight 9 kg for 4" stroke to 29 KG for 48" stroke
• Maximum generated Force on Extend @3000 PSI is 6.6 Metric Tonne or 2.2 Tonne Per 1000 PSI
• Maximum generated Force on Retract @3000 PSI is 4.0 Metric Tonne or 1.33 Tonne Per 1000 PSI
Materials of Construction
• Steel Barrel, Gland Nut and Clevis
• Hard Chromed High tensile Steel Rod
• High tensile steel pins
• Spring Steel R Clip pin retainers
• Max Working Pressure = 240 Bar (3500 PSI) 7.7 Tonne Force at 3500 psi
We can supply cylinders in many bore, stroke and Port Orientations.
Please send us a question via eBay for different size cylinders and costings.
Many types of adaptors threads, hydraulic hose and field fit hose fittings available please see our other listings.
Unlike imported cylinders, these are a robust construction with precise tolerances meant for use day in and day out in Australia's harshest conditions.
Each Cylinder is individually Oil Tested at the Factory and comes with a
TWO YEAR (2) WARRANTY
Also Available are Re-Seal kits.
Designed for many hydraulic applications in industry, manufacturing and transport and farming and can be used in Tilt Tray and Skip Bin Trucks, Front end Loaders, Backhoes, Tractors, Farm Implements and Log Spliters.
Comes complete with a Female Clevis at each end.
Postage,We send TT overnight to most locations for $25 ea or $40 for two. However some outlying properties etc may need to be sent by alternative transport . The weights for each cylinder is in the photos above.
# Please message with post code for freight confirmation.
Please email or call us on (07) 5571 6155 with your post code for freight confirmation.
Freight; Available for pick up from Brisbane or Melbourne. We will do best freight price we can, however some of these a over 25 kg, requiring pallets etc. If you are in a remote area, freight can be costly. If this applies to you, we will call & discuss options with you.