5/8" ID SAE 100R2-10 2 Wire Braid 3625 PSI 10 Meter Coil | TAIPAN

This is a high quality hose made in Europe to SAE (Society Automotive Engineers) Specifications SAE 100R2-10. 5/8" inside diameter

SAE 100R2 – 10 NON SKIVE HOSE (Two Wire)

This hose is Certified to work without failure a minimum of 200,000 Impulse Cycles (equivalent to almost 1000 excavator earth moving hours) at 133% of maximum pressure (4820 psi) and at 100% of maximum temperature 120 °C.

Suitable for either swage on fittings or re usable hose tails. (see our listings)
Synthetic rubber inner tube with Two layers of braided high tensile steel wire reinforcement and a wrapped, Oil, Ozone, Weather and Abrasion Resistant synthetic rubber outer cover.

Application
High pressure service with petroleum base hydraulic fluids, water, Air, Water-glycol, water-oil, fire resistant hydraulic fluids, hot oil grease, lubricants, crude and fuel oils. For air applications above 100psi the cover should be pin pricked.

Need another hose size, field fit reusable fittings couplers and or adaptors for your application?

Just Contact us on 0755631982