3 way Priority flow control valve flow to tank, ITALIAN
Italian made Hydraulic Pressure Compensated Adjustable Flow Divider Valve comes is various flows & port sizes. (please see options from drop down menu)
This pressure compensated adjustable flow control valve is used to Split One flow into Two Flows, it is adjustable. Valve keeps a constant flow, the exceeding flow goes only to tank. We have a slightly dearer model also, that is designed for exhaust port to flow to pressure lines.
Material of Construction = High pressure alloy
Adaptors, hose and fittings to assist in your installation are available in our online store
or call 07 5563 1982 or send us a question
Flow out of the controlled "Flow Port" can be varied between 0 and 240 lit / minute.
Any remaining flow will be bypassed to the "Excess Flow" port
This "Excess Flow" can just return to tank.
Once the "Controlled Flow" has been adjusted and set it will remain nearly constant whether pressure changes on either the Controlled or Excess flow ports.
Please be aware that if during operation the "Controlled flow" port is blocked the valve will compensate in such a way as to shut off flow to the "Excess port", please ensure that your pump is protected with a relief valve should this happen.
It should be noted that whenever these valves are used to bypass or restrict flow some heat will be generated.
Please ensure that if oil temperature exceeds a constant 65 degrees Celsius coolers may need to be installed.
It has a 250 BAR (3700 PSI) maximum operating pressure
The 50 LPM valve has 3 x 3/8" Bspp ports.
The 80 LPM valve has 3 x 1/2" Bspp ports.
The 150 LPM valve has 3 x 3/4" Bspp ports.
The 240 LPM valve has 3 x 1" Bspp ports.
Once set, it maintains constant speed regardless of load variation.
Many types of adaptors threads, hydraulic hose and field fit hose fittings available please see our other listings.
This a High Quality Valve and has many outstanding features, including.
built in adjustable relief valve
Long service life.
Buy with Confidence from a long established Hydraulic Service Center get a 12 month warranty and an Australian Tax Invoice.
Phone: 07 5563 1982
Hours: 8am to 4pm Monday - Friday, excluding public holidays
Tax invoices are supplied with every purchase
Out of Stock
It is our desire to always have every listed item actively in stock. Occasionally (but very seldom) due to high demand, short supply or human error we may be momentarily out of stock on an item. If this happens you will be notified and given the option to either cancel for a full refund or wait for the part to come in (typically 3-14 days).
If you have any questions please don’t hesitate to contact us for further assistance,
IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.