HYDRAULIC HOSE 3/8" ID Two Wire Braided 4890 PSI Working Pressure 20 Meter Coil
This is a high quality ENGMATTEC (engineering Materials Technolony) hose made in Europe. Made to meet or exceed SAE (Society Of Automotive Engineers) and EN 853 German Specifications.
This hose is Certified to work without failure a minimum of 200,000 Impulse Cycles (equivalent to almost 1000 excavator earth moving hours) at 133% of maximum pressure (6450 psi) and at 100% of maximum temperature 120 °C.
ENGMATTEC 100R2AT 3/8" DN10 Hose is also fully compatible, interchangeable and or as a direct replacement for the follow brands of hose.
RYCO AVENGER T26A and RYCO DIEHARD T26D Non-Skive Hoses.
GATES 6G2 and 6G2H
EATON GH195 AQP HI-IMPULSE hoses
PARKER 301SN-6 NON SKIVE HOSE
MANULI FLUICONNECTO 2SN FL2T06
MANULI FLUICONNECTO ROCKMASTER 2SC H01030010 (DOUBLE THIS HOSE’S BEND RADIUS, SLIGHTLY LESS WEAR RESISTANCE)
PIRTEK SAE 100R2AT, SIZES R2AT-06.
TOTAL RUBBER SUNFLEX SAE 100 R2AT EN 853 2SN, SIZE HYD-R2T-06-SF-S
.ENGMATTEC 100R2AT 3/8" DN10 Hose can also be used with the following hose fittings
RYCO BITELOK ONE-PIECE CRIMP NON SKIVE T200 AND T700 hose tails
EATON TTC / Z Series braided hose one-piece bite the wire style hose fittings.
Southcott Super Crimp S series stems with FNP-06 ferrules as well as Ezi-Crimp Non Skive One Piece Series E fittings.
CHILD FIELD FIT COUPLINGS Series RMB, RFB, RMJ, RFJ, with BN2-06 non skive Bodies.
RYCO FIELD ATTACHABLE L SERIES L00-06 FERRULES and 600 SERIES INSERTS.
TAIPAN 100R2GP-06AHF and 100R2-06AHF hose and K06 series one piece non skive hose tails and or Field Attachable D06 Tails and D2-06 Bodies.
We have used this same hose extensively in or service center and out of our hydraulic service trucks providing breakdown repairs services, as well as on new builds.
Hose has a tough abrasion, Ozone and UV resistant outer case, yet is very flexible for ease of fitting. This hose is a quality product, it suits either crimped ends, or our D.I.Y field fit reusables also available from this store.
SAE 100R2AT – 06 NON SKIVE HOSE (Two Wire)
Synthetic rubber inner tube with two layers of braided high tensile steel wire reinforcement and a oil, Ozone, weather and abrasion resistant synthetic rubber outer cover.
High pressure service with petroleum base hydraulic fluids, water, Air, Water-glycol, water-oil, fire resistant hydraulic fluids, hot oil grease, lubricants, crude and fuel oils. For air applications above 100 PSI the cover should be pin pricked
Working Pressure: 4000 PSI
Burst Pressure: 20000 PSI (Minimum)
Range of Temperature
-40⁰C to + 120⁰C
Minimum Bend Radius
Need another hose size, field fit reusable fittings couplers and or adaptors for your application? Please see our extensive 'crimp on' hose ends & field fit re-usables.
Contact us for a more competitive shipping rate. We are able send through our freight company depot to depot.