50 M coil of 3/8" HYDRAULIC HOSE 3/8" ID Two Wire 330 bar (4850 PSI) Working Pressure
Made with a Synthetic rubber inner tube with two layers of braided high tensile steel wire reinforcement and wrapped in an Oil, Ozone, Weather, and Abrasion Resistant synthetic rubber outer cover.
Meets and exceeds SAE 100R2AT and German EN 853 standards.
This hose is Certified to work without failure a minimum of 200,000 Impulse Cycles (equivalent to almost 1000 excavator earthmoving hours) at 133% of maximum pressure (6450 psi) and at 100% of maximum temperature 120 °C.
ENGMATTEC 100R2AT 3/8" DN10 Hose is also fully compatible, interchangeable and or as a direct replacement for the follow brands of hose.
RYCO AVENGER T26A and RYCO DIEHARD T26D Non-Skive Hoses.
GATES 6G2 and 6G2H
EATON GH195 AQP HI-IMPULSE hoses
PARKER 301SN-6 NON SKIVE HOSE
MANULI FLUICONNECTO 2SN FL2T06
MANULI FLUICONNECTO ROCKMASTER 2SC H01030010 (DOUBLE THIS HOSE’S BEND RADIUS, SLIGHTLY LESS WEAR RESISTANCE)
PIRTEK SAE 100R2AT, SIZES R2AT-06.
TOTAL RUBBER SUNFLEX SAE 100 R2AT EN 853 2SN, SIZE HYD-R2T-06-SF-S
.ENGMATTEC 100R2AT 3/8" DN10 Hose can also be used with the following hose fittings
RYCO BITELOK ONE-PIECE CRIMP NON SKIVE T200 AND T700 hose tails
EATON TTC / Z Series braided hose one-piece bite the wire style hose fittings.
Southcott Super Crimp S series stems with FNP-06 ferrules as well as Ezi-Crimp Non Skive One Piece Series E fittings.
CHILD FIELD FIT COUPLINGS Series RMB, RFB, RMJ, RFJ, with BN2-06 non skive Bodies.
RYCO FIELD ATTACHABLE L SERIES L00-06 FERRULES and 600 SERIES INSERTS.
TAIPAN 100R2GP-06AHF and 100R2-06AHF hose and K06 series one piece non skive hose tails and or Field Attachable D06 Tails and D2-06 Bodies
This high quality hydraulic hose is manufactured in Europe. Have piece of mind fitting a proven high quality hose which, unlike Chinese made hose does not 'mushroom' when cut (easy to fit hose ends) & will last.
AT rated for higher temperature resistance to 120° C
We have used this same hose for over 10 years in our hydraulic service trucks as well as on new builds.
It suits either crimped ends, or our D.I.Y field fit reusables also available from this store.
Please contact us with your address/postcode for a freight quote. We only charge what freight actually costs. Weight & dimensions are; 27 KG , 48cm x 42 cm x 42 cm
High pressure service with petroleum base hydraulic fluids, water, Air, Water-glycol, water-oil, fire resistant hydraulic fluids, hot oil grease, lubricants, crude and fuel oils. For air applications above 100 PSI the cover should be pin pricked.
Need another hose size, field fit reusable fittings, Crimp on fittings, couplers and or adaptors for your application?