10m Coil Hydraulic Hose 3 Wire 3/4" & 1" 3SN

SKU 100R3-12
AU$295.00
In stock
1
Product Details
Italian Made Ultra High Pressure Extra Flexible Three (3) Wire Hydraulic Hose.

Save 55% to 60% Off

Manufactured in Italy by Vittilo ® and branded "FORTHREE" (3SN)

Sizes 3/4" & 1" inch Hose Bore Size
Available in 10 metre Coils.
Longer Lengths also Available for more information ...Call (07) 5563 1982.

Size Chart and Specs


Size ID (inches) ID (mm) OD (mm) Max. Working Pressure Minimum Burst Pressure Minimum Bend Radius
Working Temperature
3 SN 3/4" 3/4" 19.0 mm 31.3 mm 5,500 psi 380 bar 22,000 psi 1,520 bar 260 mm -40 Deg C to +125 Deg C
3SN 1.0" 1.0" 25.4 mm 38.8 mm 4,800 psi 330 bar 19,200 psi 1,320 bar 310 mm -40 Deg C to +125 Deg C

Vitillo FORTHREE is a high-quality, European made product made to Special Order so stock is very limited.

Save 55% to 60% Off

  • As a Clearance Product Vitillo FORTHREE is LESS THAN 1/2 the price of SAE 100R12 and SAE 100R13 four wire hose

  • MORE PRESSURE HOLDING CAPABILITY
  • 3/4 " 3SN Hose has a 34% higher working pressure (5,500 psi) than 100R12-12 (4100 psi)
  • 3/4" 3SN has a 10% higher working pressure than SAE 100R13-12 (5,000 psi)
  • 1" 3SN Hose has a 17% higher working pressure (4,800 psi) than 100R12-16 (4100 psi)
  • And is almost as good (4800psi) as SAE100R13-16 4 wire hose at (5,000 psi)

TIGHTER BENDS Means More Compact Installations

Vitillo FORTHREE 3SN in 3/4" and 1" Has an 8% Tighter Bends radius than SAE 100R12 and SAE100R13 Hydraulic Hoses (of the same hose bores)

Comapred to 100R12 four (4) wire hose,3SN has an 8% Tighter bend radius.

Please contact us for detailed and accurate crimp dimensions we recommend to Skive the hose best results.

(Skive means to remove the outside protective layer of the hose for a short distance in order to give the hose fittings better bite and holding power to the hose)

VITILLO THREE WIRE ULTRA FLEXIBLE EXTRA HIGH PRESSURE HYDRAULIC HOSE AVAILABLE IN LIMITED QUANTITIES AND IN TWO COMMON HOSE BORE SIZES.

  • 3SN 3/4" DN19,
  • 3SN 1.0" DN25

THE Hoses listed above can be supplied with either 1 or 2 piece hydraulic hose fittings

  • THE FOLLOWING SIZES AND THREAD TYPES ARE AVAILABLE
  • JIC FEMALE AND MALE HOSE TAILS SIZES, 1-1/16 and 1-5/16 JIC male and Female
  • BSP FEMALE AND MALE HOSE TAILS SIZES, In 3/4" and 1.0" inch
  • ALL AVAILABLE WITH CRIMP ON SKIVE FERRULES
  • Contact us for stock AND or Crimp Dimensions.

https://www.hydraulic.online/store/

Construction

Synthetic rubber inner tube with Three layers of braided high tensile steel wire reinforcement and a wrapped, Oil, Ozone, weather and abrasion resistant synthetic rubber outer cover.
Application
High pressure service with petroleum base hydraulic fluids, water, Compressed Air, Water-glycol, water-oil, fire resistant hydraulic fluids, hot oil, grease, lubricants, crude and fuel oils.

For air applications above 100 PSI the cover should be pin pricked.

Working Temperature -40 Deg C to +125 Deg C

Need another hose type or size, Do it your self field fit reusable fittings, Quick couplers? or even adaptors for valves pumps and Motors?

Just Contact us on (07) 5571 6155, (07) 5563 1982


Save this product for later