1/4" 2 wire Hydraulic Hose 50m SAE100R2AT-04 5800 PSI

50 meter coil of Premium quality 1/4 " ID 400 bar (5800 PSI) working pressure Flame Resistant high temp 120°C Two Wire Hydraulic Hose

This is a great tough skinned hose, that is also very flexible.

ENGMATTEC 100R2AT 1/4" DN6 Hose is also fully compatible, interchangeable and or as a direct replacement for the follow brands of hose.

• RYCO AVENGER T24A and RYCO DIEHARD T24D Non-Skive Hoses.
• GATES 4G2 and 4G2H
• EATON GH195 AQP HI-IMPULSE hoses
• PARKER 301SN-4 NON SKIVE HOSE
• MANULI FLUICONNECTO 2SN FL2T04
• MANULI FLUICONNECTO ROCKMASTER 2SC H01030006 (DOUBLE THIS HOSE’S BEND RADIUS, SLIGHTLY LESS WEAR RESISTANCE)
  

• PIRTEK SAE 100R2AT, SIZES R2AT-04, R2AT-06, R2AT-08, R2AT-12.
• TOTAL RUBBER SUNFLEX SAE 100 R2AT EN 853 2SN, SIZES HYD-R2T-04-SF-S,
• .ENGMATTEC 100R2AT 1/4" DN6 Hose can also be used with the following hose fittings
• RYCO BITELOK ONE-PIECE CRIMP NON SKIVE T200 AND T700 hose tails
• EATON TTC / Z Series braided hose one-piece bite the wire style hose fittings.
• Southcott Super Crimp S series stems with FNP-04 ferrules as well as Ezi-Crimp Non Skive One Piece Series E fittings.
• CHILD FIELD FIT COUPLINGS Series RMB, RFB, RMJ, RFJ, with BN2-04 non skive Bodies.
• RYCO FIELD ATTACHABLE L SERIES L00-04 FERRULES and 600 SERIES INSERTS.
• TAIPAN 100R2GP-04AHF and 100R2-04AHF hose and K04 series one piece non skive hose tails and or Field Attachable D04 Tails and D2-04 Bodies
• This hose is Certified to work without failure a minimum of 200,000 Impulse Cycles (equivalent to almost 1000 excavator earth moving hours) at 133% of maximum pressure (7715 psi) and at 100% of maximum temperature 120 °C.

It suits either crimped ends, or our D.I.Y field fit reusables also available from this store.

SAE 100R2AT – 04 NON SKIVE HOSE Two Wire)

This is a good quality hose made in Europe to meet or exceed SAE (Society of Automotive Engineers) and EN853 Geman Standard.

Specifications

Construction

Synthetic rubber inner tube with one layer of braided high tensile steel wire reinforcement and a oil, Ozone, weather and abrasion resistant synthetic rubber outer cover.

Application

High pressure service with petroleum base hydraulic fluids, water , Air, water-glycol, hot oil, grease, lubricants, crude and fuel oils. For air applications above 100psi the cover should be pin pricked

Hose Specifications

Pressure Range

Working Pressure: 400 Bar (5800 PSI)

Burst Pressure: 23200 PSI (Minimum)

Range of Temperature

-40⁰C to + 120⁰C

Minimum Bend Radius

100 mm

Weight

0.35KG/Mtr

Postage

Please contact us for a more competitive shipping rate. We are able to send through freight depot to depot.