10 meter coil of premium quality ENGMATTEC ® 1/4" ID two wire Hydraulic Hose 400 Bar (5800 PSI) working pressure, Flame Resistant Anti Static, High Temp applications to +120°C
ENGMATTEC two wire hydraulic hoses are fully compatible, interchangeable or a direct replacement for many popular and more expensive hydraulic hose brands and types.
ENGMATTEC is a Non-Skive Hose which means the outer cover does not need to be removed before pressing or screwing on the appropriate Hydraulic Hose Fittings.
Most People Purchase and then Re-order the following four Most Common ENGMATTEC sizes of Two (2) Wire braided hydraulic hose and these 4 sizes are as follows.
100R2AT 1/4" DN6,
100R2AT 3/8" DN10,
100R2AT 1/2" DN12,
100R2AT 3/4" DN19.
Please contact us for detailed and accurate crimp dimensions
ENGMATTEC SAE100R2AT two 2 wire hydraulic hose is compatible with.
GATES 4G2, 6G2, 8G2, 12G2 and GATES High Temperature 4G2H, 6GTH, 8G2H, 12G2H
RYCO BITELOK ONE-PIECE CRIMP NON SKIVE T200 AND T700 hose tails.
EATON TTC / Z Series braided hose one-piece "bite the wire" style hose fittings.
Southcott Super Crimp S series stems with FNP-04, FNP-06, FNP-08, FNP-12 ferrules as well as Ezi-Crimp Non Skive One Piece Series E fittings.
CHILD FIELD FIT COUPLINGS Series RMB, RFB, RMJ, RFJ, with BN2-04, BN2-06, BN2-08, AND BN2-12 non skive Bodies.
RYCO FIELD ATTACHABLE L SERIES L00-04, LOO-06, LOO-08, LOO-12 FERRULES and 600 SERIES INSERTS.
TAIPAN SERIES ONE PIECE NON SKIVE HOSE TAILS
K04JF, K06JF, K08JF, K12JF, AND K04JM, K06JM, K08JM, K12JM and
K04BF, K06BF, K08BF, K12BF, AND K04BM, K06BM, K08BM, K12BM or
TAIPAN Field Attachable D04, D06, D08, D12 Tails and D2-04, D2-06 D2-08, AND D2-12 Bodies.
This is a great tough skinned hose, that is also very flexible.
This hose is Certified to work without failure a minimum of 200,000 Impulse Cycles (equivalent to almost 1000 excavator earth moving hours) at 133% of maximum pressure (7715 psi) and at 100% of maximum temperature 120 °C.
It suits either crimped ends, or our D.I.Y field fit reusables also available from this store.
SAE 100R2AT – 04 NON SKIVE HOSE Two Wire.
This is a good quality hose Made in Europe to meet or exceed SAE (Society of Automotive Engineers) and German Standard EN 853 .
Specifications
Construction
Synthetic rubber inner tube with one layer of braided high tensile steel wire reinforcement and a oil, Ozone, weather and abrasion resistant synthetic rubber outer cover.
Application
High pressure service with petroleum base hydraulic fluids, water , Air, water-glycol, hot oil, grease, lubricants, crude and fuel oils. For air applications above 100psi the cover should be pin pricked
Need other hose sizes and or field fit reusable hose fittings?
Please see our other listings on our ebay store.
Hose Specifications
Pressure Range
Working Pressure: 400 Bar (5800 PSI)
Burst Pressure: 23200 PSI (Minimum)
Range of Temperature
-40⁰C to + 120⁰C
Minimum Bend Radius
100 mm
Weight
0.35KG/Mtr
Postage Australia Wide $18
If you wish to buy more than one item, please send us a message for combined shipping.
Please send us a message for any questions you may have.
Tax invoices are supplied with every purchase
Messages will be answered within normal business hours (ie: 8.30am - 5.00pm M-F)